Effect of micro graphite particles on the microstructure and mechanical behavior of aluminium 6061 (Al-Mg-Si) alloy composites developed by novel two step casting technique

Authors

• Madeva Nagaral
• Raghavendra Pai K.
• V. Auradi
• Bharath V.
• Shanawaz Patil
• Mahantesh S. Tattimani

Publication Date

2021

Abstract

In the present research, the effect of micron sized graphite addition on the microstructure and tensile failure of Al6061 alloy has been studied. The Al6061 alloy metal matrix composites reinforced with 6, 9 and 12 varying weight percentages of graphite particles were fabricated by novel two step stir cast route which helps in improving the wettability of Al6061 alloy matrix with graphite particles. The synthesized composites were subjected to microstructural studies, density, hardness and tensile properties testing. Microstructural characterizations of obtained samples were carried out by SEM microscopy, EDS and XRD patterns. The occurrence of graphite particles were confirmed by the XRD patterns. The density and hardness of metal composites have been decreased with adding of graphite reinforcement, while the ultimate tensile strength and yield strengths were improved with the addition of graphite particles. There was increase in the elongation of the Al6061 alloy composite after the incorporation of the reinforcement. Various fracture mechanisms were observed in the Al6061-graphite composites using SEM.

DOI

10.55713/jmmm.v31i2.1046

First Page

38

Last Page

45

Recommended Citation

Nagaral, Madeva; Pai K., Raghavendra; Auradi, V.; V., Bharath; Patil, Shanawaz; and S. Tattimani, Mahantesh (2021) "Effect of micro graphite particles on the microstructure and mechanical behavior of aluminium 6061 (Al-Mg-Si) alloy composites developed by novel two step casting technique," Journal of Metals, Materials and Minerals: Vol. 31: No. 2, Article 5.
DOI: 10.55713/jmmm.v31i2.1046
Available at: https://digital.car.chula.ac.th/jmmm/vol31/iss2/5