Chulalongkorn University Theses and Dissertations (Chula ETD)
การปรับปรุงประสิทธิภาพการผลิตโดยวิธีคิวซีดี : กรณีโรงงานผลิตชิ้นส่วนรถยนต์บรรทุกขนาดเล็ก
Other Title (Parallel Title in Other Language of ETD)
Productivity improvement through QCD : a case of a small truck parts manufacturing plant
Year (A.D.)
1997
Document Type
Thesis
First Advisor
วันชัย ริจิรวนิช
Faculty/College
Graduate School (บัณฑิตวิทยาลัย)
Degree Name
วิศวกรรมศาสตรมหาบัณฑิต
Degree Level
ปริญญาโท
Degree Discipline
วิศวกรรมอุตสาหการ
DOI
10.58837/CHULA.THE.1997.983
Abstract
ปรับปรุงประสิทธิภาพในด้านคุณภาพ ต้นทุนการผลิต และการจัดส่งสินค้าของโรงงานผลิตชิ้นส่วนรถยนต์บรรทุกขนาดเล็ก พบว่าปัญหาที่ทำให้ประสิทธิภาพการผลิตต่ำ ได้แก่ ปัญหาด้านระบบคุณภาพ ด้านต้นทุนการผลิต การส่งมอบสินค้าให้กับลูกค้าล่าช้า จากปัญหาดังกล่าวผู้วิจัยได้เสนอแนวทางในการปรับปรุง โดยการจัดทำระบบคุณภาพ การลดต้นทุนการผลิต และจัดระบบบำรุงรักษา เพื่อลดปัญหาการส่งมอบสินค้า ผลจากการศึกษาวิจัยและดำเนินการปรับปรุง เพื่อเพิ่มประสิทธิภาพการผลิต สามารถสรุปได้ดังนี้ 1. จัดทำระบบคุณภาพ เพื่อใช้ในการควบคุมการผลิต มีผลทำให้ลดวัสดุที่ไม่ได้คุณภาพก่อนนำเข้า 44.16% และลดปัญหาชิ้นส่วนที่ไม่ได้คุณภาพในการส่งมอบให้ลูกค้าโดยเฉลี่ย 31.61% 2. การลดต้นทุนการผลิต โดยปรับปรุงต้นทุนด้านวัสดุ ผลจากการดำเนินการ มีผลทำให้ต้นทุนสามารถลดลงจากเดิม 2035 บาท ลดลงเหลือ 1852.98 บาท หรือลดลง 8.94% 3. การจัดทำการบำรุงรักษา เพื่อป้องกันการหยุดของเครื่องจักรและเพิ่มประสิทธิภาพให้เครื่องจักร มีผลทำให้สามารถลดจำนวนครั้งการส่งมอบล่าช้าลงได้จาก 14.16% เหลือ 7.14%
Other Abstract (Other language abstract of ETD)
Improves the efficiency and increasing the productivity in a small truck parts manufacturing plant. According to the result of this study, it's found the causes of low productivity are quality, cost and parts delivery delay. From these researcher suggested the method to do quality system, cost reduction and preventive maintenance. It could be summarized as the following: 1. To do quality control system. Reduction incoming materials problem 44.16%, defective parts 31.61% in average. 2. Cost reduction. Regarding cost reduction, the former average 2035 baht is reduce to 1852.98 baht or 8.94% 3. To do preventive maintenance to improve parts delivery delay. Parts delivery delay was reduced from 14.16% to 7.14%.
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-No Derivative Works 4.0 International License.
Recommended Citation
ตรัยวนพงศ์, สุรัตน์, "การปรับปรุงประสิทธิภาพการผลิตโดยวิธีคิวซีดี : กรณีโรงงานผลิตชิ้นส่วนรถยนต์บรรทุกขนาดเล็ก" (1997). Chulalongkorn University Theses and Dissertations (Chula ETD). 23380.
https://digital.car.chula.ac.th/chulaetd/23380