Chulalongkorn University Theses and Dissertations (Chula ETD)
การขึ้นรูปและคุณสมบัติของโครงเลี้ยงเซลล์ที่มีรูพรุนจากพอลิคาโปรแลกโตนเคลือบด้วยเจลาติน/ไฮยาลูโรแนน/คอนโดรอิตินซัลเฟต
Other Title (Parallel Title in Other Language of ETD)
Fabrication and properties of gelatin/hyaluronan/chondroitin sulfate coated on porous polycaprolactone scaffold
Year (A.D.)
2010
Document Type
Thesis
First Advisor
พิชญ์ ศุภผล
Second Advisor
ประสิทธิ์ ภวสันต์
Faculty/College
Graduate School (บัณฑิตวิทยาลัย)
Degree Name
วิทยาศาสตรมหาบัณฑิต
Degree Level
ปริญญาโท
Degree Discipline
วิศวกรรมชีวเวช
DOI
10.58837/CHULA.THE.2010.2194
Abstract
โครงสร้างเซลล์สามมิติได้ถูกพิจารณาว่ามีผลต่อการเจริญและการสร้างสารองค์ประกอบนอกเซลล์ของเซลล์ งานวิจัยจึงได้ขึ้นรูปพอลิคาโปรแลกโตนที่มีรูพรุนด้วยการระเหยตัวทำละลายและซะเอาเกลือออก จากนั้นจึงเคลือบพื้นผิววัสดุด้วยผสมเจลาติน/ไฮยาลูโรแนน/คอน-โดรอิ-ตินซัลเฟตด้วยวิธีการแช่แข็งและทำให้แห้ง จากนั้นให้วัสดุเกิดปฏิกิริยาเชื่อมพันธะกันด้วย 1-เอทิล-3 (3-ไดเมทิลอะมิโนโพรพิล) เพื่อชะลออัตราการย่อยสลายของวัสดุ ประเมินสมบัติางสัณฐานวิทยาด้วยกล้องจุลทรรศน์อิเล็กตรอนส่องกราด พบโครงสร้างที่มีรูพรุนขนาดของรูอยู่ที่ 265-350 ไมครอน ซึ่งเป็นขนาดที่เหมาะแก่การเลี้ยงเซลล์ การศึกษาสมบัติทางเคมีพื้นผิวด้วยการวิเคราะห์มุมสัมผัสของน้ำสามารถยืนยันได้ว่า โครงเลี้ยงเซลล์ที่มีเจลาตินอยู่บนพื้นผิวมีความชอบน้ำมากขึ้นกว่าวัสดุพอลิคาโปรแลกโตน ผลการทดสอบความสามารถในการดูดซับน้ำ แสดงให้เห็นถึงการดูดซับน้ำได้มากขึ้นของวัสดุเจลาตินที่ผ่านกระบวนการเชื่อมพันธะ จากการประเมินความเข้ากันได้ทางชีวภาพพบว่า วัสดุโครงเลี้ยงเซลล์จากพอลิคาโปรแลกโตนและพอลิคาโปรแลกโตนที่มีเจลาติน/ไฮยาลูดรแนน/คอนโดรอิตินซัลเฟต ไม่ก่อให้เกิดความเป็นพิษต่อเซลล์และยังช่วยเกื้อหนุนการเกาะของเซลล์ต้นกำเนิดโพรงฟันบนพื้นผิววัสดุได้ดีขึ้นอีกด้วย
Other Abstract (Other language abstract of ETD)
Three dimensional scaffolds have been considered to have certain effets on cell growth and the secretion of extracellular matrices (ECMs.) In this study, a porous polycaprolactone (PCL) was fabricatd by solvent casting and particulate leaching method which incorporated with gelatn-hyaluronate-chondroitin sulfate on its surfae by freeze-drying method. To decline degradation rate, 1-etyl-3-(3-dimethylamino-propyl)-arbodiimine (EDC) was used in crosslink system. Scanning electron microscope (SEM) was used to investigate morphology. The scaffold showed pore size between 265-350 µm, which preferable for cell culturing. Chemical property analysis confirmed greater hydrophilicity than polycaprolactone surface. Scaffold with crosslinked glatin demonstratd better water absorption. Biocompatbility evaluation by human dental pulp cell indicated no toxicity of porous PCL saffolds and PCL with gelatin-hyaluronate-chondroitin sulfate. In addition, gelatn-hyaluronate-chondroitin sulfate on PCL scaffold also upported cell attachment.
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-No Derivative Works 4.0 International License.
Recommended Citation
เพ็ญศิริกุล, สิริรัตน์, "การขึ้นรูปและคุณสมบัติของโครงเลี้ยงเซลล์ที่มีรูพรุนจากพอลิคาโปรแลกโตนเคลือบด้วยเจลาติน/ไฮยาลูโรแนน/คอนโดรอิตินซัลเฟต" (2010). Chulalongkorn University Theses and Dissertations (Chula ETD). 17598.
https://digital.car.chula.ac.th/chulaetd/17598